EME Series 4000
EME Series 4000 label dispensers are characterized by its industrial
and compact design. The narrow housing and the separate controller
means that Series 4000 can be installed where space is tight and still
be easy to use in daily life.
Series 4000 is our “heay duty” industrial dispenser. Build to be used
many hours every day - it withstands heavy load and requires a
minimum of maintenance. The very powerful stepper motor provides
silent and precise labeling.
When connecting an encoder the dispenser will adjust the actual
speed continuously - even while dispensing is in progress. This
makes Series 4000 ideal for applications running intermittent mode
or applications running variable speed - EME Series 4000 will follow!
Series 4000 is available in different versions all based on the same
basic module. The difference lies solely in the maximum possible
label width and diameter of the label roll. The controller's backlit display
and 16 keys with icons makes the daily operation easy and intuitive.
The controller can store up to 25 different labeling programs incl.
settings for external devices - it means very short changeover times.
and compact design. The narrow housing and the separate controller
means that Series 4000 can be installed where space is tight and still
be easy to use in daily life.
Series 4000 is our “heay duty” industrial dispenser. Build to be used
many hours every day - it withstands heavy load and requires a
minimum of maintenance. The very powerful stepper motor provides
silent and precise labeling.
When connecting an encoder the dispenser will adjust the actual
speed continuously - even while dispensing is in progress. This
makes Series 4000 ideal for applications running intermittent mode
or applications running variable speed - EME Series 4000 will follow!
Series 4000 is available in different versions all based on the same
basic module. The difference lies solely in the maximum possible
label width and diameter of the label roll. The controller's backlit display
and 16 keys with icons makes the daily operation easy and intuitive.
The controller can store up to 25 different labeling programs incl.
settings for external devices - it means very short changeover times.
Maximum Line Speed
40.0
m/min
Supplies
Max. label roll diameter:
400
mm
Max liner rewind roll diameter: 200 mm
Core diameter: 40 mm
Min. label width with liner: 15 mm
Max. label width with liner: 300 mm
Min. label length: 10 mm
Max. label length: 999 mm
Max liner rewind roll diameter: 200 mm
Core diameter: 40 mm
Min. label width with liner: 15 mm
Max. label width with liner: 300 mm
Min. label length: 10 mm
Max. label length: 999 mm
Environment
Temperature:
5 - 40 oC
Humidity: 90% non condensing
Humidity: 90% non condensing
Physical
Dimmensions:
547 x 691 x 436
mm
Weight: 26.0 kg
Weight: 26.0 kg
Additional information
Moveable dispenser tongue Spring-loaded or pneumatic (variable product height or product contour)
Label gap micro switch When using transparent labels
Ultrasonic sensor When using both transparent and opaque labels.
Motorized label off-winder Recommended for heavy label rolls and demand for low tolerances/high speed.
Encoder (tacho) For step less varying dispensing speed (continuously adjusted while dispensing)
Message for "label roll near end" From I/O, requires beacon
Message for "end of labels" Text message in controller
Beacon For visualization of above signals.
Counter functions Continuous counting. Other functionality on request.
Key lock facility To prevent changes in memory settings
Hot-stamp The EME S4000 controller can control EME M01 hot-stamp unit (timings, temperature etc.)
TTO-printer (ThermalTransferOverprinting) Brackets available for Markem-Imaje 8018 and ICE Pegasus. Other models on request.
External signal interface (I/O) For controlling an optional product separator, reject-system etc. Makes it also possible to
integrate vision, barcode scanner, sensors etc.
Label gap micro switch When using transparent labels
Ultrasonic sensor When using both transparent and opaque labels.
Motorized label off-winder Recommended for heavy label rolls and demand for low tolerances/high speed.
Encoder (tacho) For step less varying dispensing speed (continuously adjusted while dispensing)
Message for "label roll near end" From I/O, requires beacon
Message for "end of labels" Text message in controller
Beacon For visualization of above signals.
Counter functions Continuous counting. Other functionality on request.
Key lock facility To prevent changes in memory settings
Hot-stamp The EME S4000 controller can control EME M01 hot-stamp unit (timings, temperature etc.)
TTO-printer (ThermalTransferOverprinting) Brackets available for Markem-Imaje 8018 and ICE Pegasus. Other models on request.
External signal interface (I/O) For controlling an optional product separator, reject-system etc. Makes it also possible to
integrate vision, barcode scanner, sensors etc.
Warranty: 12 month